M.2 2260 Industrial SSD - M.2 NGFF SSD

Renice M.2 SSD, SLC and MLC SSD Solutions

Renice M.2 2260 SSD with industrial SSD temperature -40 to 85°C

Industrial grade NGFF SSD solution: Renice M.2 2260 SSD

Renice X5A M.2 SSD is a high capacity industrial grade NGFF SSD solution. With unique firmware architecture, maximizing SATAIII bandwidth limits and delivers excellent Read/Write performance 500/440MB/s, equipped with 512MB DDR-1600. With adopting SLC/ MLC NAND flash technology, and utilizing a unique firmware architecture, Renice industrial SSD maximizes the bandwidth limitations of SATAIII providing up to 75,000 IOPS. Renice M.2 2260 SSD is an ideal solution for a variety of applications, including enterprise solutions that require large amounts of data input and output, and industrial automation in high shock and vibration environments.

Basic Information
Standard Serial ATA	SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)
Form Factor	M.2 2260 (NGFF) 60.0mm x 22.0mm x 3.65mm (L x W x H)
Connector	75pin SATA-based M.2 pinout
Capacities	32GB~512GB (MLC SSD); 16GB~128GB (SLC SSD)
Input Voltage	3.3V (±5%)
Type	Industrial SSD
Performance
Max Sequential Data Read/Write	500MB/440MB/s
Access Time	<0.1ms
MTBF	>3,000,000 Hours @25C
4Kb Random Read/Write IOPS	70,000 / 75,000
Flash Memory Management
Flash Management Algorithm	Static and dynamic wear-leveling, bad block management algorithm
Dynamic Power Management and SMART	√
BCH ECC	66-Bit /1KBytes
Other Functions
Power Failure Protection	√
Over Voltage Protection	√
AES 256bit Encryption	Optional
TRIM	√
Environment
Temperature Ranges	Operation: -40 to 85°C; Storage: -50 to 95°C
Vibration	5-95%
Shock	Peak Acceleration: 1,500 G, 0.5ms (Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms (Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)

Document

· RENICE X5A M.2 2260 SATAIII SSD Datasheet V1.0.pdf

2022-05-23 1.26MB

Request for Quote